MAC Encore Performance (CLD) + (WRM)


MAC Encore Performance (CLD) + (WRM)

£8,990.00 £10,788.00 inc VAT

MAC Encore™ Performance WRM integrates cutting-edge LED technology with a proprietary and innovative light engine carefully engineered to generate pristine, full spectrum light with ultra-high colour rendition.

The feature-packed moving head offers unparalleled 3000 K warm tungsten emulation that truly challenges the output quality of a real incandescent light source. Its advanced colour mixing system delivers the full palette from smooth and subtle pastels to rich and vibrant saturated colours. Moreover, it offers a fully variable colour correction to blue/daylight.

  • Unparalleled 3000 K warm white light quality
  • Super silent cooling and effects operation
  • Best-in-class size/weight/performance ratio
  • Description
  • Reviews (0)



Length452 mm (17.8 in.)
Width (across yoke)480 mm (18.9 in.)
Height (maximum)740 mm (29.2 in.)
Height (head straight up)731 mm (28.8 in.)
Weight31 kg (68.4 lbs.)
Minimum center-to-center distance in side-by-side installation700 mm (27.6 in.)
Dynamic Effects
Colour mixingCMY, independently variable 0 – 100%
Colour temperature controlVariable 6000 – 2700 K
Colour wheel6 x interchangeable dichroic filters + open, indexing, continuous rotation, random colour
Rotating gobo wheel5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake
Gobo animationInterchangeable animation wheel, indexing, continuous rotation with variable speed and direction
FramingRotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position
IrisVariable 0 – 100%
FrostVariable 0 – 100%
Dimmer/shutter0 – 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
Dimming optionsChoice of four dimming curves
Pre-programmed effectsTwo ranges of FX, independent or synchronized/combined Focus
Position correction systemAbsolute position monitoring
Control and Programming
DMX channels38
Setting and addressingControl panel with backlit graphic display and jog wheel or via DMX 16-bit control
Movement control optionsTracking and vector
Fixture identificationUser-settable ID number
DMX complianceUSITT DMX512-A
RDM complianceANSI/ESTA E1.20
TransceiverOpto-isolated RS-485
Fixture software updateUSB memory device or over DMX link
Light source6000 K white LEDs
Total LED engine power468 W
Minimum LED lifetime50 000 hours (to >80% luminous output)*
Zoom range12° – 48° one-tenth peak (1:4)
*Figure obtained under manufacturer’s test conditions
Photometric Data
Light engine luminous output≥ 39 400 lumens
Fixture luminous output11 600 lumens
CRI (Color Rendering Index)>80
CQS (Color Quality Scale)>80
TM-30 Rf (IES TM-30-15 Fidelity Index)>80
TM-30 Rg (IES TM-30-15 Gamut Index)>95
TLCI (Television Lighting Consistency Index)>70
HousingHigh-impact flame-retardant thermoplastic
Protection ratingIP20
Mounting points4 pairs of 1/4-turn locks
LocationDry location only, must be fastened to surface or structure
Minimum distance to combustible materials0.2 m (8 in.)
Minimum distance to illuminated surfaces2.0 m (6.6 ft.)
AC power inputNeutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector) DMX and RDM data in/out: 5-pin locking XLR
AC power120-240 V nominal, 50/60 Hz
Power supply unitAuto-ranging electronic switch-mode
Power consumption, all effects static, zero light output64 W Half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
Typical Power and Current
120 V, 60 Hz5.0 A, 596 W, PF 0.998
208 V, 60 Hz2.9 A, 581 W, PF 0.988
230 V, 50 Hz2.6 A, 580 W, PF 0.981
240 V, 50 Hz2.2 A, 585 W, PF 0.979
Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor
CoolingCombined convection and forced air (temperature-regulated, low noise, user-definable levels)
Maximum surface temperature, steady state, Ta=40° C75° C (167° F)
Maximum ambient temperature (Ta max.)40° C (104° F)
Minimum ambient temperature (Ta min.)5° C (41° F)
Total heat dissipation (calculated, +/- 10%)2000 BTU/hr.
EU safetyEN 60598-2-17, EN 62471, EN62493
EU EMCEN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety
US EMCFCC Part 15 Class A
Canadian safetyCSA C22.2 No. E598-2-17
Canadian EMCICES-003 Class A


There are no reviews yet.

Be the first to review “MAC Encore Performance (CLD) + (WRM)”