Description
2x Ventis 110A + 2x Subline 115SA
The VN3000 is built around four boxes: a pair of Ventis 110A’SAs and a pair of Subline 115SAs, bundled together with a pair of variable-height connecting poles. This makes for a powerful full-range mobile PA system that also offers the added flexibility to be broken down into smaller setups if that’s what a particular event or situation requires.
Ventis 110A
The Ventis 110A is an extraordinary active speaker featuring a 10” low-frequency woofer and a 1” B&C high-frequency compression driver arranged in a vertical configuration. It’s a great-sounding, solid box made out of 15mm birch ply finished in a scratch-resistant paint and features a full-face grille. At just 15.6kg, it’s incredibly easy to move around using the integrated handle on the top of the cabinet. It also features a number of M10 suspension points, so it’s perfect for permanent installation, as well as a 35mm top-hat underneath for mounting on the included sub pole or a standalone tripod.
Around the back, you’ll find the amp module that almost spans the entire width of the cabinet and offers 700W RMS of low-frequency amplification and 200W RMS of high-frequency. As with the rest of the Ventis range, the LF is Class D while the HF is Class H/AB.
Power is delivered by a powerCON TRUE1 connector, and an AC loop out is also included so you can daisy-chain the power for another cabinet.
Input-wise, the Ventis 110A offers a single XLR / ¼-inch jack combi socket that can accept both a LINE or MIC level signal and a pair of RCA phono connections to allow, for example, an external MP3 player to be directly connected. Both inputs have a dedicated level control, which means that a mic and background music source can be connected and mixed without the need for a separate mixer. An XLR output socket is also provided to allow the audio signal to loop out to another cabinet.
The built-in DSP – accessed via a large backlit LCD display and corresponding turn-and-push control dial – allows you to fine-tune the sound to your own liking. It also allows you to dial in a delay (0-10 metres), which is very useful for conference work, as well as a Hi-Pass filter. This means that you can either run the box full-range, so it’s useful as a discreet cabinet for wedding ceremonies or speeches, or allow it to concentrate all of its power on the hi/mid frequencies when you have the sub connected.
The Subline 115SA active cabinet is a 15″ subwoofer. The band-pass design of its predecessor, the 15SA, has been updated to a more traditional bass-reflex configuration, resulting in a smaller and lighter cabinet. Some would argue that a front-firing box like this really needs to be a lot bigger, with chunky drivers, in order to get really low, but that’s certainly not the case with the amazing 115SA.
SUBline115SA
The 115SA is built around a 15″ woofer with a 3-inch voice coil. This offers a huge amount of punch and high SPL from an incredibly compact design. The amp module offers 700W RMS and has a built-in DSP with eight different presets. You also get an 8-step delay control and a Phase push button.
Two XLR input sockets (a stereo pair) are provided alongside corresponding outputs and a push button to activate or bypass the variable High Pass filter. This means that, for smaller gigs, you can run the VN3000 as a 3-box system with your mixer connected to a single sub feeding the two top boxes in stereo.
Looks wise, the sub matches the 110A perfectly, with its birch-ply cabinet finished in the same scratch-resistant paint and full-face grille. Two ergonomic handles on the side make it easy to lift and, at just 28kg this 15″ sub is a true portable design with no compromise on performance.
The VN3000 is perfect for conference work, ceremonies, speeches and perfect for DJ or live music events
VENTIS 110A Specifications
- Configuration: 2 Way
- Frequency response: 58Hz – 20kHz -6dB
- Low frequency woofer: 10″ / 2″ coil
- High frequency driver: 1″ / 1.4″ coil
- Maximum SPL cont/peak: 124/131dB
- Dispersion: 80 x 50 Rotatable
- Input impedance: 22kOhm
- Input connector: XLR/Jack Combo socket with XLR link out, RCA stereo input
- AC Power requirements: 640VA
- Built-in amplifier LF/HF: 900w (700w LF + 200w HF)
- Built-in amplifier peak LF/HF: 1800w (1400w LF + 400w HF)
- Power cord: 5m Neutrik True1
- Built in amplifier: 900w (700w LF + 200w HF)
- Built in amplifier peak: 1800w (1400w LF + 400w HF)
- Maximum SPL continuous/peak: 124/131dB
- Dispersion (HxV): 80? x 50? rotatable
VENTIS 110A Dimensions
- Net Dimension (WxHxD): 329 x 575 x 325mm
- Net Weight: 15.6kg
- Transport Dimension (WxHxD): 420 x 675 x 400
- Transport Weight: 18.1kg
- Packed Dims (HxWxD): 67.5cm x 42cm x 40cm
- Packed Weight: 18.5kg
SUBline 115SA Specifications
- System type: 1 way
- Internal amplifier:
- max: 700W RMS
- max: peak: 1400W
- Low frequency woofer: 1 x 15″ / 3″ coil
- Frequency response @-6dB: 38Hz – 140Hz
- Input impedance: 22kOhm
- Input connectors: Stereo XLR
- Max. SPL cont/peak: 132 / 135
- Dispersion: omnidirectional
- Crossover frequency: 90 or 140Hz
- AC power requirement: 600VA
- Enclosure material: birch plywood
- Power supply cable: 19.68 ft
SUBline 115SA Dimensions
- Net dimensions (WxHxD): 228 x 268 x 548 mm / 19.68 x 20.35 x 22.44 inch
- Shipping dimensions (WxHxD): 367 x 849 x 477 mm / 26.18 x 23.62 x 23.42 inch
- Net weight: 28 kg / 61.72 lbs
- Shipping weight: 31.5 kg 69.44 lbs
- Packed Weight: 34 kg
- Packed Dims (HxWxD): 59.5cm x 60cm x 55.5cm
Dimensions
- Total Dimensions: 109.6kg
Package Contents
- 2 x VENTIS 110A – 1 x 10″ + 1″ Active Speaker (SPL dB 124/131)
- 2 x SUBline 115SA – 15″ Active Subwoofer (SPL dB 132/135)
- 2 x MSA 220BK – Telescopic Poles
- 4 x (2 x VN-C 110A / 2 x SL-C115) Padded Covers
Downloads
