Tel: 0151 345 9909

£0.00 0

Basket

No products in the basket.

Crystal Sound and Light Logo

LE MAITRE Flame fluids 12 X 500ML

A range of natural and coloured fluids specially formulated for use in our Salamander flame machines.

Restricted to professional users.

 

£254.40

Description

Available in Natural, Green and Red in 500ml canisters. 

  • RED FUEL CELLS FOR CHAMELEON/SALAMANDER
  • GREEN FUEL CELLS FOR CHAMELEON/SALAMANDER
  • NATURAL FUEL CELLS FOR CHAMELEON/SALAMANDER

This product does not contain (other) ingredients which are classified according to present knowledge of the supplier and contribute to the classification of the product, and hence require reporting in this section.

Product Video

 Natural Flame Canister

 Green Flame Canister

 Red Flame Canister

 

Health and safty Documents

PHYSICAL AND CHEMICAL PROPERTIES

  • Extremely flammable aerosol
  • Pressurized container: may burst if heated
  • Harmful if swallowed, in contact with skin or if inhaled.
  • May damage fertility. May damage an unborn child.
  • Causes damage to organs (optic nerve (nervus opticus), central nervous system).

MANAGEMENT OF ASSOCIATED RISKS PRECAUTIONS

Keep away from heat, hot surfaces, sparks, naked flames and other ignition sources. No smoking.

Keep away from acids, alkalis and oxidizing substances.

Do not spray on a naked flame or other ignition source.

Do not pierce or burn, even after use.

Do not breathe dust/fumes/gas/mist/vapours/spray.

IF exposed or concerned: call a POISON CENTRE/doctor.

Protect from sunlight: Do not expose to temperatures exceeding 50 0C/122 0F (Protect from UV-radiation/sunlight.)

SUBSTANCE

  • Dimethyl ether
  • Ethanol
  • Methanol
  • Boric acid
  • Methyl ethyl ketone

FIRST AID MEASURES

General information: Do not leave affected person unattended. Remove away from the danger area. If unconscious, place in the recovery position. Never give anything by mouth. Remove all contaminated clothing. If in any doubt, or if symptoms persist, seek medical attention immediately.

After inhalation: Provide fresh air. If breathing is irregular or has stopped, seek medical attention immediately and start to administer first aid. Call a Poison Centre/doctor.

After skin contact: Wash off immediately with plenty of soap and water. If a rash or skin irritation occurs, seek medical attention.

After eye contact: Irrigate copiously with water for at least 15 minutes, holding eyelids apart. Remove any contact lenses if this can be done safely. Continue to rinse. If eye irritation persists, seek medical advice.

After swallowing: Rinse mouth thoroughly with water only if person is conscious. Induce vomiting if the affected person is conscious. Call a Poison Centre/doctor.

FIREFIGHTING MEASURES

Suitable extinguishing agents: Use water spray or dry chemical extinguishers. Firefighting measures should be appropriate to surroundings.

Unsuitable extinguishing agents: Water jet

Advice for firefighters: In case of fire and/or explosion, do not inhale fumes. Firefighting measures should be chosen in accordance with surroundings. Collect contaminated firewater separately and do not allow to enter drains or water courses. Fight fire from a safe distance and while taking usual precautions.

ACCIDENTAL RELEASE MEASURES

Non-emergency personnel: Remove people to safety and keep away from and also upwind of spill/leak. Ventilate affected area.

Emergency personnel: Wear breathing apparatus if exposed to vapours/dust/spray/gases and personal protective equipment as required.

Environmental precautions: Keep away from drains, surface and ground water. Collect and dispose of contaminated firewater.

Methods and materials for containment and cleaning up: Covering of drains, Place in appropriate containers for disposal. Ventilate affected area.

HANDLING AND STORAGE

Measures to prevent fire as well as aerosol and dust generation: Use local and general ventilation and restrict use to well-ventilated areas only. Ground/bond container and receiving equipment.

Occupational hygiene: Wash hands after use. Take off all contaminated clothing and protective equipment immediately, and before entering eating areas. Do not breathe gas/fumes/vapours/spray. Avoid contact with the skin and the eyes. Keep away from food, drink and animal foodstuffs and do not place chemicals in containers that are usually used for food and drink. Smoking, eating and drinking should be prohibited in the application area.

Store in a well-ventilated place. Keep container tightly sealed

Ventilation requirements: keep any substance that emits harmful vapours or gases in a place that allows them to be permanently extracted.

Packaging: only approved packaging (eg acc. to ADR) should be used.

PERSONAL PROTECTIVE EQUIPMENT

Eye/face protection: Use safety goggles with side protection.

Skin protection: Protective clothing.

Hand protection: Wear suitable gloves, for example, chemical protection gloves tested according to EN 374. Suitability does not only depend on the material but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material cannot be calculated in advance and has therefore to be checked prior to the application.

Type of material: Butyl rubber.

Material thickness: Use gloves with a minimum material thickness of ≥ 0.7mm

Breakthrough time of the glove material: Use gloves with a minimum breakthrough time of the glove material of >480 minutes (permeation level 6).

Other protection measures: Take recovery periods for skin regeneration. Use of preventative skin protection eg barrier creams or ointments, is recommended. Wash hands thoroughly after use. Provision of eyewash stations and safety showers.

Respiratory protection: During spraying, wear suitable respiratory equipment. In poorly ventilated areas, wear respiratory protection. Full face mask/half mask/quarter mask.

Environmental exposure controls: Take appropriate precautions to avoid uncontrolled release into the environment. Keep away from drains, surface and ground water.

CHEMICAL PROPERTIES

Physical state: Liquid, solid, gaseous (spray aerosol)

Colour: Colourless

Odour: Alcohol

Melting/freezing point: Not determined

Boiling point/initial boiling point/boiling range: -24.8 0C calculated value referring to a component of the mixture

Flammability: Flammable aerosol in accordance with GHS criteria

Lower and upper explosion limit: LEL 2.5 vol % / UEL 26.2 vol % calculated value referring to a component of the mixture

Flash point: 9.7 0C at 1.013 hPa (fluid) calculated value

Auto-ignition temperature: 226 0C (auto-ignition temperature (liquid and gases)) calculated value referring to a component of the mixture

Vapour pressure: 3.850 mmHg at 25 0C calculated value referring to a component of the mixture

Aerosols: Components (flammable) 87.44 %

Propellant content 50 %

DISPOSAL CONSIDERATIONS

Sewage disposal-relevant information: Do not empty into drains. Avoid release to the environment.

Waste treatment: It is dangerous waste. approved packaging only to be used (eg acc. to ADR). Completely empty packaging may be recycled. Handle contaminated packaging in same way as substance itself.

LEGAL DISCLAIMER

The information presented herein is accurate to the best of our knowledge. We will not be held liable for any inaccuracy, non-concurrency or incompleteness of the information provided. We disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by any use of, the product not in conformity with the instructions herein. It is our duty to take all necessary steps to ensure that any person handling and using the product is provided with the information.