Titan Zoom Wash T1

Description

Further expanding the Titan range, the Zoom Wash T1 is an IP65 rated fixture with a lightweight, compact, durable housing specifically designed for wet, dusty, and sandy conditions. Designed for both rental and installation applications, the fixture is equipped with 7 x 40W RGBL LEDs along with super-fast and quiet motors for precision movements. When used at its narrowest 3.5 degree beam angle, sharp mid-air effects can be created whilst at its widest 45 degrees wide washes can bathe venues and stages in rich colours. The addition of lime in the LEDs produces a high CRI of 85Ra, and the central LED can be controlled separately to the outer LEDs, whilst an the RGB halo produces a range of eye-candy effects. The Titan Zoom Wash T1 has an adjustable refresh rate perfect for TV and film, it also features 3 selectable fan speeds including a studio mode with a 32.7dB noise level for noise sensitive applications. A range of preset colour macros, ring programs along with colour temperature presets further bolsters this fixtures offering.

• Power consumption: 320W
• Power supply: 100~240V 50/60Hz
• Fuse: T6.3A 250V
• IP rating: IP65
• Noise level @ 1m (no movement): Studio – 32.7dB, Power – 41.6dB, Live – 41dB
• Noise level @ 1m (with movement): Studio – 47.7dB, Power – 50.8dB, Live – 50.5dB
• Dimensions (H x W x D): 385 x 290 x 227mm
• Weight: 10.1kg
• 2 year warranty
• 7 x 40W quad-colour LEDs (RGBL)
• 46 x tri-colour 3535 SMD LEDs (RGB)
• Adjustable beam angle: 3.5°- 45°
• 3.5° – 82,723 Lux @ 2m (full on), 45° – 2,040 Lux @ 2m (full on)
• CRI: >85Ra
• Refresh rate: 5 selectable presets between 1.2kHz-25kHz
• Motorised zoom
• Pixel zone mapping
• DMX channels: 9/13/14/20/28/32 or 37 selectable
• Wireless control (W-DMX Sweden transceiver)
• Auto, manual control and master/slave modes
• Built-in colour macros and patterns
• Colour temperature presets
• Pan/tilt auto correction
• 16-Bit pan/tilt positioning
• Pan: 540°, Tilt: 220°
• 0 – 100% dimming
• 4 dimming curves: Linear, square law, inverse square law and S-curve
• Variable strobe
• PowerTwist TR1 input/output
• 5-Pin XLR input/output
• 3-Pin XLR input/output
• RDM (Remote Device Management)
• 4 button menu with 2.4” TFT display
• Display battery backup for offline configuration
• Supplied with quick release omega clamps
• Square hole spacing on omega clamp receivers allows for clamps to be mounted in all orientations
• USB-C port (firmware updates)
• 3 selectable fan modes (live, power and studio)